Shure Wireless Microphone ULXD4 ULXD4D ULXD4Q Wireless Microphone

Shure Wireless Microphone ULXD4 ULXD4D ULXD4Q Wireless Microphone

ULXD4 Wireless Receiver: Half Rack

ULXD4D Dual-Channel Wireless Receiver: Full Rack

ULXD4Q Four-Channel Wireless Receiver: Full Rack

ULXD1 Wireless Bodypack Transmitter: ULXD1 is compatible with various Shure lavalier, headset, and clip-on instrument microphones.

ULXD2 Wireless Handheld Transmitter: To meet specific sound requirements, the ULXD2's microphone capsule is interchangeable with Shure's full range of dynamic and condenser capsules, which offer diverse sound characteristics and polar patterns.

Shure ULXD4 One-to-One Wireless Microphone System

Single-channel digital diversity receiver, clear 24-bit digital audio, up to 63 compatible systems

Front panel LCD menu and lockable controls, frequency and power lock, adjustable contrast and brightness

External DC power supply, includes rack mount kit

Independent gain control, LED level meter, and XLR output per channel

Up to 72 MHz tuning range, frequency scanning, automatic frequency assignment, and IR sync

Ethernet networking for multi-receiver management, WWB6 integrated control, and AMX/Crestron control

Ethernet networking interface simplifies frequency coordination and deployment across multiple receivers

Up to 60 dB of independently adjustable gain per channel

AES256 encryption to prevent interference and output of poor signals

Dedicated software integration for advanced frequency coordination planning and monitoring

Supports AMX/Crestron control, remotely installable ½-wave antennas

Features one XLR and one TRS analog output, switchable Mic/Line output level

"Chassis: Galvanized steel

Frequency response: 20Hz-20kHz

RF transmission range: 470 -937 MHz, depending on region

Image rejection: >70dB, typical

Latency: 2.9 ms (3.2 ms in high-density mode)

Audio dynamic range: Analog output >120dB, Dante digital output 130dB A-weighted (typical)

Total harmonic distortion (−12 dBFS output, system gain @+10): <0.1%

Operating temperature: -18℃ to 50℃

Gain adjustment range: -18 to +42 dB, in 1 dB steps (plus mute setting)

Network interface: Single-port Ethernet 10/100Mbps (DHCP or manual IP address)

Power requirements: 15 V DC@0.6 A, supplied by external power supply (center positive)

Dimensions (H x W x D): 41 x 171 x 197 mm

Weight (without antennas): 0.9 kg"

Shure ULXD4D One-to-Two Wireless Microphone System

Dual-channel digital diversity receiver, clear 24-bit digital audio, up to 63 compatible systems

Two receiver channels integrated in one 1RU unit, built-in power supply, intuitive LCD display

Independent gain control, LED level meter, and XLR output per channel

Frequency scanning, automatic frequency assignment, and IR sync

Built-in audio summing to route two or more audio channels to multiple receiver output combinations

RF cascade port to distribute RF signal to another device

Ethernet networking interface simplifies frequency coordination and deployment across multiple receivers

Up to 60 dB of independently adjustable gain per channel, standard Dante digital network audio output

AES256 encryption to prevent interference and output of poor signals

Supports bodypack diversity, dedicated software integration for advanced frequency coordination planning and monitoring

Supports AMX/Crestron control, remotely installable ½-wave antennas

Features four independent XLR and TRS analog outputs, switchable Mic/Line output level

"Chassis: Galvanized steel

Frequency response: 20Hz-20kHz

RF transmission range: 470 -937 MHz, depending on region

Image rejection: >70dB, typical

Latency: 2.9 ms (3.2 ms in high-density mode)

Audio dynamic range: Analog output >120dB, Dante digital output 130dB A-weighted (typical)

Total harmonic distortion (−12 dBFS output, system gain @+10): <0.1%

Operating temperature: -18℃ to 50℃

Gain adjustment range: -18 to +42 dB, in 1 dB steps (plus mute setting)

Network interface: Dual-port Ethernet 1 Gbps (DHCP or manual IP address)

Power requirements: 100 - 240 V AC, 50 - 60 Hz, 0.26 A (max)

Dimensions (H x W x D): 44 x 482 x 274 mm

Weight (without antennas): 3.36 kg"

Shure ULXD4Q One-to-Four Wireless Microphone System

Four-channel digital diversity receiver, clear 24-bit digital audio, up to 63 compatible systems

Four receiver channels integrated in one 1RU unit, built-in power supply, intuitive LCD display

Independent gain control, LED level meter, and XLR output per channel

Frequency scanning, automatic frequency assignment, and IR sync

Built-in audio summing to route two or more audio channels to multiple receiver output combinations

RF cascade port to distribute RF signal to another device

Ethernet networking interface simplifies frequency coordination and deployment across multiple receivers

Up to 60 dB of independently adjustable gain per channel, standard Dante digital network audio output

AES256 encryption to prevent interference and output of poor signals

Supports bodypack diversity, dedicated software integration for advanced frequency coordination planning and monitoring

Supports AMX/Crestron control, remotely installable ½-wave antennas

Features four independent XLR and TRS analog outputs, switchable Mic/Line output level

"Chassis: Galvanized steel

Frequency response: 20Hz-20kHz

RF transmission range: 470 -937 MHz, depending on region

Image rejection: >70dB, typical

Latency: 2.9 ms (3.2 ms in high-density mode)

Audio dynamic range: Analog output >120dB, Dante digital output 130dB A-weighted (typical)

Total harmonic distortion (−12 dBFS output, system gain @+10): <0.1%

Operating temperature: -18℃ to 50℃

Gain adjustment range: -18 to +42 dB, in 1 dB steps (plus mute setting)

Network interface: Dual-port Ethernet 1 Gbps (DHCP or manual IP address)

Power requirements: 100 - 240 V AC, 50 - 60 Hz, 0.32 A (max)

Dimensions (H x W x D): 44 x 482 x 274 mm

Weight (without antennas): 3.45 kg "